48V 0.5A POE Power Injector for IP Devices

This power injector adds Power over Ethernet (PoE) capability to a single network device, letting you run power and data over one Ethernet cable. It works well with IP phones, IP cameras, home networking gear, and other PoE-enabled devices that require 48V of power.

The injector plugs directly into a standard outlet and connects inline with your existing Ethernet cabling using RJ45 connectors. It follows the IEEE 802.3af standard and includes built-in protection against over-voltage, short circuits, and over-current, with automatic recovery once a fault clears.

• Output: 48V DC, 0.5A (24W maximum)
• Input: 100-240V, 50/60Hz, 1A max
• Standard: IEEE 802.3af
• Connector type: RJ45
• Efficiency: 80% minimum
• Turn-on delay: 2 seconds; max rise time 40ms
• Protections: auto-recover over-voltage, short circuit, over-current
• Operating temperature: -10 to +40C (14 to 104F)
• Certifications: UL 60950, CE, RoHS

Do not use this injector with devices that require more than 500mA of current, as it is designed for lower-power PoE applications only.

Why buy from Keep Supplies?
Free shipping on every order, no minimum. 30-day returns, no hassle. Real support if you need it – just reach out.