3.5mm TRRS 4-Conductor Male to Female Panel-Mount Cable

This 3.5mm TRRS extension cable connects a male 4-conductor plug to a female 4-conductor jack, letting you extend or panel-mount a standard audio connection. The 4-conductor (3 black ring) design carries left and right audio plus a microphone or video signal, making it suitable for sound cards, speakers, headsets, portable media players, and microphones that use a TRRS connector.

Both ends are molded and shielded to reduce radio frequency and electromagnetic interference, and each end is angled at 90 degrees for a low-profile connection. The cable uses a PVC jacket with an inner hood soldered 360 degrees around the connector for durability. The female end can be panel-mounted by loosening the ring-bolt at the threaded portion of the connector, allowing it to be secured through an enclosure or panel while the male end plugs into your device.

This cable is available in multiple lengths to fit different setups, from short in-line extensions to longer panel-mount runs.

• Connectors: 3.5mm (1/8″) 4-conductor male to 3.5mm (1/8″) 4-conductor female
• Cable outer diameter: 3.00mm
• Molded, shielded 90-degree ends
• PVC jacket with soldered inner hood
• Female end supports panel mounting
• Available in multiple lengths: 6 IN, 10 IN, 1.5 FT, 3 FT, 6 FT

Why buy from Keep Supplies?
Free shipping on every order, no minimum. 30-day returns, no hassle. Real support if you need it – just reach out.